TH040-OTP40秒 OTP語音芯片 產品資料
產品描述: （已替代，請查看最新的TF040）
TH040是一顆支持PWM和DAC輸出的40秒的OTP語音芯片,音質效果好，共有四個I/O口,其中2個Input,2個簡單I/O,簡單I/O只能觸發單段語音或用于馬達和閃燈，外圍僅需一顆104電容，產品方案成本極低.
DataSheet原理圖TF040下載 -- TH040原理圖 請查看最新的TF040AC
Description
TH040 is a 40 Sec Easy Use Speech IC .It Support PWM or DAC voice output with high quality speech , There are 40 second Voice Length under 6 KHz sampling and 4 bit hardware compression. Its internal built-in a oscillator for system clock without an external resistor. Maximum 63 voice groups. One Group contain several steps(voice section ); Maximum 700 steps for all the Groups. Each Step can be define Trigger Mode, Output Status, Voice Section, Mute length, I/O Type & Simple Programming Function. User can select 8bit / 5bit / 4bit data compression. Support three mode trigger IC (Stand Alone, Serial Trigger Mode, CPU Command Mode ). Easy use development system is for function selection and voice combination . PC download the ROM code by the USB Port .
Functions
- MAX voice file : 700
- MAX Trigger Groups : 63
- Power On Trigger Group :1
- MAX Step : 700
- Signal step mute length : 0.64 s ( 6k sample rate )
- Operating Voltage range: 2.4V ~ 3.6V
- Total Voice Duration : 40” (240K Samples)
- I/O pin : 4
- Voice output : PWM or DAC
- Sequential Key : TG1 -> 32 Groups.
TG2 -> 29 Groups.
TG3,TG4-> 1 Group
- Debounce time : 50 us or 10 ms
- On/Off function : only for all TG PIN
- Sequential Key for Volume control function.
- Step can change Trigger I/O Type, Trigger Mode & Output Status.
- Hardware Trigger Group Repeat function.
- Simple Programming Function :
- (a) Write data to working register.
- (b) Working Register Increasing.
- (c) Step Jump by Working Register / Volume Status.
- Three Mode Trigger IC :
- Key Stand-alone Trigger Mode :
- Edge/Level
- Hold/Unhold
- Retrigger/Irretrigger
- Serial Trigger Mode :
Combinations of TG1 and TG2 to trigger maximum 63 Voice Group.
- CPU Command Mode :
User command through TG1,TG2,TG3 & TG4 with serial CPU Interface to control the Multi-Playback function.
- Output status (for each Output pin):
- Stand by Status. (High/Low Status)
- Busy Low Active.
- Busy High Active.
- LED Flash at 6 Hz.
- LED Flash at 3 Hz.
- LED Flash at 1.5 Hz.
- LED Flash at 0.75 Hz.
- PWM for LED Dimming Control.
- Play rate level :
TH040 can provide different play rate in one code as follow below Reference Sample Rate.
3K, 3.2K, 3.31K, 3.42K, 3.55K, 3.69K, 3.84K, 4K, 4.17K, 4.36K, 4.57K,
4.8K, 5.05K, 5.33K, 5.64K, 6K, 6.4K, 6.85K, 7.38K, 8K, 8.72K, 9.6K, 10.66K, 12K, 13.71K, 16K, 19.2K, 24K.
- TG2 Low Reset
- TG3 Volume Control
TH040 Trigger Voice Combination Example
Voice File |
Description |
Voice File A |
Hello ( 1.5”) |
Voice File B |
Good Morning (3”) |
Voice File C |
John (1”) |
Voice File D |
Tom (1”) |
Voice File E |
Mary (1.5”) |
|
|
Group1 = Step1 + Step 2
Group 2 = Step3 + Step 4 + Step 5
Group 3 = Step 6 + Step 7
Group1 = Hello John
Group 2= Hello Tom Good Morning
Group 3 = Good Morning Mary
Step1 = Voice File A
Step 2 = Voice File C
Step 3 = Voice File A
Step 4 = Voice File D
Step 5 = Voice File B
Step 6 = Voice File B
Step 7 = Voice File E
Total use 3 Group , 7 Steps
Voice duration= Hello + Good Morning + John + Tom + Mary
= 1.5” + 3” + 1” + 1” + 1.5”
= 8”
Total duration = 8” ( 20”-8” = 32” space are free , can add more Voice File )
TH040 Serial Mode Timing
TG1=Edge/Unhold/Retriger
TG3=Reset PIN
※Tool：Controller Trigger
DC Electrical Characteristics
Item |
Symbol |
Min |
Typ |
Max |
Unit |
Condition |
Operating voltage |
VDD |
2.4 |
3.0 |
4.5 |
V |
|
Standby current
(LDO ON) |
Isb |
3 |
4 |
5 |
uA |
VDD=3V,no load |
Standby current
(LDO OFF) |
Isb |
1 |
1.5 |
3 |
uA |
VDD=3V,no load |
Operating current |
Iop |
|
600 |
|
uA |
VDD=3V,no load |
Drive current of Output |
Iod |
|
10 |
|
mA |
VDD=3V
VOUT=0.6V |
Sink current of Output |
Ios |
|
30 |
|
mA |
VDD=3V
VOUT=2.4V |
Drive current of PWM |
Iod |
|
200 |
|
mA |
VDD=3V,VOUT=1.5V |
Sink current of PWM |
Ios |
|
200 |
|
mA |
VDD=3V,VOUT=1.5V |
|
|
|
|
|
|
|
AC Electrical Characteristics
Symbol |
Characteristic |
Rating |
Unit |
Min. |
Typ. |
Max. |
tdb |
Key Trigger debounce time (long) |
14 |
|
|
ms |
tdb |
Key Trigger debounce time (short) |
50 |
|
|
us |
tBH |
Busy signal output hold time |
200 |
|
|
us |
tBD |
Busy signal output delay time |
200 |
|
|
us |
tdV |
Voice ouput delay time |
200 |
|
|
us |
tCS |
Chip Select setup time |
1 |
|
|
us |
tDS |
Data In setup time |
1 |
|
|
us |
tDH |
Data In hold time |
1 |
|
|
us |
tCP |
Clock Pulse Width |
1 |
|
|
us |
tCC |
Clock Cycle time |
2 |
|
|
us |
tCH |
Chip Select hold time |
1 |
|
|
us |
產品優勢：
1,
Otp-TH040 內置電阻、外圍沒有元器件，外圍電路只需要要104電容．
整個方案的費用給您節省30%－50% .
2, 工作電壓2.4V—3.6V；輸出方式：PWM＆DAC .(應用于5V方案時，需要加LDO降壓芯片)
3, 當今市場唯一一款8Pin的DIP,SOP封裝OTP語音芯片.AT@CHIP
4, 唯一一款可以燒錄裸片出貨的OTP語音芯片產品,不需光罩費,音質和單價市場最優.
出貨形式：
dip、 SOP、COB（可為積壓盒專用）、裸片（已燒錄好）。 其中裸片一塊Wafer可以同時燒錄4款不同的產品，直接綁定生產，大大地節約生產時間, dip、 SOP、COB 1天交貨，裸片5-7天交貨。
一次性燒錄語音芯片/OTP開發銷售中心
相關產品：AC8040-OTP40秒 AC8020-OTP20秒 AC8080-OTP80秒
最新產品: AC9020-OTP20秒 AC9080-OTP80秒 AC9010-OTP10秒
Other: TG005 TG010 TG020 TG040 TF020 TF040 TH040 TH080
新產品系列OTP語音芯片全面支持4.5V和3V,為您提供最加穩定的語音輸出.
環芯公司銷售團隊竭誠為您服務，同時我們將以最好的產品質量和價格為您和您的企業帶來更好的產品和效益。歡迎來電咨詢!
本著平等互惠原則，期待與您攜手合作，共創輝煌。
深圳市環芯半導體有限公司 TH040-OTP40秒 |
